PPPoE with Raspberry Pi

1. Install pppoe, pppoeconf, and pppstatus

sudo apt-get install pppoe pppoeconf pppstatus

2. Configure PPPoE

pppoeconf

Run the pppoeconf command and keep selecting "yes" through the prompts. During the process, you will be asked to enter your PPPoE account and password.

3. Check whether ppp0 was generated

ifconfig

4. Share the ppp0 network through wlan0 as a hotspot

In Haoran.Qi/RaspberryPi, change eth0 to ppp0 on lines 71-74.